Illegal System DLL Relocation Fix __FULL__
Windows stores instructions for graphical elements such as dialog boxes and windows in the User32.dll file. The User32.dll file is necessary to the operation of Windows. If this file is damaged, deleted, or removed, the system will no longer work correctly. If a program or a service accesses User32.dll incorrectly, the program or the service will not work correctly.User32.dll errors are typically corrected by repairing the User32.dll file or by reinstalling the program, the hardware component, or the driver that is causing the error. If these procedures do not correct the User32.dll error, you can restore your computer to a condition before the error appeared by using the Windows System Restore feature.Note If you cannot start Windows because of a User32.dll error, see the "Start your computer in safe mode and use System Restore" section.
Illegal System DLL Relocation Fix
306084 How to restore the operating system to a previous state in Windows XPImportant We recommend that you run Windows Update after you perform a system restore. For more information, see Method 1. We also recommend that you update your antivirus software after you run Windows Update. For more information about antivirus software that Microsoft supports, click the following article number to view the article in the Microsoft Knowledge Base:
315396 How to troubleshoot startup problems in Windows 2000Important We recommend that you run Windows Update after you perform a system restore. For more information, see Method 1. We also recommend that you update your antivirus software after you have run Windows Update. For more information about antivirus software supported by Microsoft, click the following article number to view the article in the Microsoft Knowledge Base:
Some User32.dll errors can be fixed by restoring the original User32.dll file from your Windows CD. Restoring the User32.dll file replaces the copy of User32.dll on your computer by using the original copy of User32.dll that is contained on your Windows CD. You can use this method if you are running one of the following Windows operating systems:
936212 How to repair the operating system and how to restore the operating system configuration to an earlier point in time in Windows VistaNote You may find it easier to follow the steps if you print this article first.Before you perform this procedure you should have the Windows installation CD.
The User32.dll file is damaged, renamed or removed: The User32.dll file could be damaged during a system or software update. A damaged User32.dll file might be missing a routine that is required by a program that you installed. When the program tries to call these routines, an error occurs. A user might accidentally rename or remove the User32.dll file.
The following list describes system error codes (errors 500 to 999). They are returned by the GetLastError function when many functions fail. To retrieve the description text for the error in your application, use the FormatMessage function with the FORMAT_MESSAGE_FROM_SYSTEM flag.
Indicates that an attempt was made to assign protection to a file system file or directory and one of the SIDs in the security descriptor could not be translated into a GUID that could be stored by the file system. This causes the protection attempt to fail, which may cause a file creation attempt to fail.
An illegal character was encountered. For a multi-byte character set this includes a lead byte without a succeeding trail byte. For the Unicode character set this includes the characters 0xFFFF and 0xFFFE.
Windows Evaluation Notification The evaluation period for this installation of Windows has expired. This system will shutdown in 1 hour. To restore access to this installation of Windows, please upgrade this installation using a licensed distribution of this product.
Illegal System DLL Relocation The system DLL %hs was relocated in memory. The application will not run properly. The relocation occurred because the DLL %hs occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
Virtual Memory Minimum Too Low Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. During this process, memory requests for some applications may be denied. For more information, see Help.
GUID Substitution During the translation of a global identifier (GUID) to a Windows security ID (SID), no administratively-defined GUID prefix was found. A substitute prefix was used, which will not compromise system security. However, this may provide a more restrictive access than intended.
The application is loading executable code from the module %hs. This is secure, but may be incompatible with previous releases of the operating system. An alternative, %hs, is available. Should the application use the secure module %hs?
Redundant Read To satisfy a read request, the NT fault-tolerant file system successfully read the requested data from a redundant copy. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but was unable to reassign the failing area of the device.
Redundant Write To satisfy a write request, the NT fault-tolerant file system successfully wrote a redundant copy of the information. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but was not able to reassign the failing area of the device.
The CPUs in this multiprocessor system are not all the same revision level. To use all processors the operating system restricts itself to the features of the least capable processor in the system. Should problems occur with this system, contact the CPU manufacturer to see if this mix of processors is supported.
In these cases, the system itself often offers possible solutions to the problem. This is quite convenient when the user first encounters this error and does not know what to do at all. In any case, this article will tell you in detail about the possible options for repairing the USER32.dll file.
Perhaps you have not enabled the automatic Windows update function; if so, it is quite possible that important updates are not being downloaded in a timely manner. In such a case, update the system right now and then have system updates be automatically downloaded.
Relocation is the process of assigning load addresses for position-dependent code and data of a program and adjusting the code and data to reflect the assigned addresses. Prior to the advent of multiprocess systems, and still in many embedded systems, the addresses for objects were absolute starting at a known location, often zero. Since multiprocessing systems dynamically link and switch between programs it became necessary to be able to relocate objects using position-independent code.A linker usually performs relocation in conjunction with symbol resolution, the process of searching files and libraries to replace symbolic references or names of libraries with actual usable addresses in memory before running a program.
Relocation is typically done by the linker at link time, but it can also be done at load time by a relocating loader, or at run time by the running program itself. Some architectures avoid relocation entirely by deferring address assignment to run time; as, for example, in stack machines with zero address arithmetic or in some segmented architectures where every compilation unit is loaded into a separate segment.
The relocation table is a list of pointers created by the translator (a compiler or assembler) and stored in the object or executable file. Each entry in the table, or "fixup", is a pointer to an absolute address in the object code that must be changed when the loader relocates the program so that it will refer to the correct location. Fixups are designed to support relocation of the program as a complete unit. In some cases, each fixup in the table is itself relative to a base address of zero, so the fixups themselves must be changed as the loader moves through the table.
Instead, segments are relative values in the DOS EXE file. These segments need to be corrected, when the executable has been loaded into memory. The EXE loader uses a relocation table to find the segments which need to be adjusted.
With 32-bit Windows operating systems, it is not mandatory to provide relocation tables for EXE files, since they are the first image loaded into the virtual address space and thus will be loaded at their preferred base address.
For both DLLs and for EXEs which opt into address space layout randomization (ASLR), an exploit mitigation technique introduced with Windows Vista, relocation tables once again become mandatory because of the possibility that the binary may be dynamically moved before being executed, even though they are still the first thing loaded in the virtual address space.
Windows uses the user32.dll file to store instructions for graphical elements, such as dialog boxes and windows. This makes the user32.dll file necessary to the operation of Windows. If this file gets damaged or deleted, the system will no longer work properly.
User32.dll error messages usually describe the source of the error and include the information about the involvement of the user32.dll file. This is true for the Illegal system DLL relocation error and other related user32.dll errors. The most common cause of this problem is outdated program components, which means that it can be fixed by running Windows Update. You can either launch Windows Update from the Control Panel or do the following:
DLL, short for Dynamic Link Library, is a type of essential file that contains a set of instructions used for running almost every program in Windows 10, Windows 8, and Windows 7. If the DLL files are missing from Windows operating system, you may not be able to run the programs or applications you need.